Ricoh Pro C751EX Operating Instructions Manual page 187

Erase Center / Border
Erases both the center and edge margins of the original image.
• The relationship between the original orientation and the erased part is as follows:
1. Erased part
2. 2 99 mm (0.1 3.9 inches)
• To erase the image on the back side of the original, press [2 Sided Setting] and then [Back Side].
Erasing the image on the back side is valid when you copy 2-Sided originals.
• The erase width is set to 10 mm (0.4 inches) as a default. You can change this setting under Edit in
User Tools. For details about Edit, see p.257 "Edit".
• The width of the erased margin varies depending on the reproduction ratio.
Erase Border (same width)
Erases the edge margin of the original image.
BZH125
original
BZH126
Advanced Copier Functions
original
BZK065
4
185