1. Side fences
3.
Set the end fence.
1. End fence
To remove the end fence, pinch it to release the stopper and slide it to the right.
4.
Press the elevator switch on the multi bypass tray (tray 6).
The blue lamp of the elevator switch is blinking while the original table is going up, and keeps lit
when it stops.
Press the elevator switch to move down the original table if you want to either add paper or
remove jammed ones.
1
CDH008
1
CDH009
CDH010
Copying from the Multi Bypass Tray (Tray 6)
2
59