Page Numbering - Ricoh Pro C751EX Operating Instructions Manual

Default: [Auto]
Superimpose
You can have the date stamp printed in white when it overlaps black parts of the image.
Default: [Off]
Stamp Color
Sets the selected priority color when printing the date.
Default: [Black]
Stamp Setting
Specify how the date stamp is printed.
• Stamp Position
Specify where to print the date stamp.
Default: [Top Left]
• Adjust Stamp Position
You can adjust the position of the date stamp within the available ranges shown below.
"Top Left" T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
"Top Center" T/B: 0.1 5.7 inches, L/R: 2.8 2.8 inches
"Top Right" T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
"Bottom Left" T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
"Bottom Center" T/B: 0.1 5.7 inches, L/R: 2.8 2.8 inches
"Bottom Right" T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
• Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as
shown below.
Top-Bottom: Top 17.0 inches Bottom 17.0 inches
Left-Right: Left 17.0 inches Right 17.0 inches
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
Default: [All Pages]

Page Numbering

This section describes the user tools in the Page Numbering menu under Stamp.
Stamp Format
You can select the page number format given priority when [Page Numbering] is pressed.
Stamp
6
265