Ricoh Pro C751EX Operating Instructions Manual page 110

2. Basic Copying
5. Select Fold Orientation, Open Orientation, and Multi-sheet Fold.
2
6. Press [OK] twice.
7. Place the originals, and then press the [Start] key.
• Folded documents are delivered to the multi-folding unit only.
• You can specify the fold-back position in 1 mm (0.04 inches) increments under Letter Fold-out
Position in User Tools. For details about Letter Fold-out Position, see "System Settings", Network
and System Settings Reference
• The Multi-sheet Fold function can fold a maximum of three sheets at a time.
• When you enable the Multi-sheet Fold function (by setting it to [On]), the Sort function is
automatically applied also. However, the Mixed Sizes function is not available while the Multi-
sheet Fold function is enabled.
• If the Booklet or Magazine function is set, the settings for those functions have priority.
• The following copier functions are not available when the Letter Fold-out function is enabled:
• Punch
• Staple
• Wrinkling can occur when applying letter fold-out to B4 JIS , A3 , 8
× 18 , 8K , or larger sheets. In some cases, you may have to use A4
applying folds in combination with the reduction function.
• To fold multiple sheets with the Letter Fold-out function, you must install the Z-fold support tray for
the multi-folding unit and the output holding unit for letter fold-out. For details about how to
configure these settings, see "When the Output Letter Fold-out Paper Is Less than the Stack
Capacity", Troubleshooting
Letter Fold-in
Applies two folds to create three equal panels (outer panels folding inward).
108
.
.
1
/ × 14 , 11 × 17 , 12
2
sheets or smaller when