Designate - Ricoh Pro C751EX Operating Instructions Manual

2. Select [Copy] or [Blank] for the front cover.
3. Select [Copy] or [Blank] for the back cover, and then press [OK].
4. Select the main sheet tray that contains the paper to copy the originals.
• The back cover sheet should be the same size and orientation as the main sheets.
• You can use paper of different size and orientation than the main sheets as the front cover sheet.
• When stapling copies with the front cover whose size and orientation is different from the main
sheets, the front cover sheet should be the same width in paper feed direction as the main sheets.
For example, when the main sheet is A5 , you can staple the copies with the front cover sheet of
A4 , but you cannot staple them with that of A4 .
• When you specify both front and back covers, the first and last pages of your original are copied
on paper specified for use as a cover, or cover sheets are inserted before the first copy and after
the last copy.
• You can make a combined copy on the front cover sheet. For details about Front Cover Copy in
Combine, see p.257 "Edit".
• If Blank mode is selected, the cover will not be counted as a copy.
• The settings made under Front Cover Sheet and Back Cover Sheet in Tray Paper Settings determine
whether or not the front and back covers are duplex printed.
• At Mode Selected... Settings made in Front Cover Sheet and Back Cover Sheet will take
priority.
• Full Time... Settings made in Paper Type will take priority.

Designate

Use this function to have certain pages of your original copied onto designation sheets or to insert a
designation sheet for each page specified.
• Copy
Advanced Copier Functions
213
4