Ricoh Pro C751EX Operating Instructions Manual page 92

2. Basic Copying
• When the number of copies exceeds tray capacity, copying stops. If this happens, remove copies
from the tray to resume copying. For details about the number of copy sheets that the output tray
can accommodate, see "Specifications for Finisher SR5030 (Optional)" or "Specifications for
Booklet Finisher SR5040 (Optional)", About This Machine
• If you are copying from the exposure glass, a single copy of each original is made first. If the first
2
copy set is acceptable, you can make the remaining copy sets by pressing the [ ] key. The time
required for copy sets to be delivered varies depending on the print settings.
• When placing an original on the exposure glass, start with the first page to be copied. When
placing originals in the ADF, set so that the first page is on the top.
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• You can change the settings for Sort under Input / Output in User Tools. For details, see p.269
"Input / Output".
• Paper sizes and orientations that can be shifted when delivered to the shift tray are as follows:
• SRA3 , SRA4
× 15 , 11 × 14 , 10 × 15 , 10 × 14 , 8
8 × 10
13 , 7
16K
13 × 19
Sample Copy
Use this function to check the copy settings before making a long copy run.
• This function can be used only when the Sort function is selected.
1. Select Sort and any other necessary functions, and then place the originals.
90
, A3 , B4 JIS , A4
1 1
, 8 / × 14 , 8 / × 11
2 2
1 1
/ × 10 / , 182 × 210mm
4 2
,
1 3
/ , 13 × 19 , 12 /
5
, B5 JIS , A5
1
/ × 14 , 8 × 10
4
1 1
, 5 / × 8 /
2 2
, 170 × 210mm
1 3
× 19 / , 12 / × 18
5 5 5
.
, 12 × 18 , 11 × 17 , 11
1
/ ,
2
1 1
, 8 / × 13 , 8 / × 13 , 8 ×
2 4
, 210 × 340mm , 8K ,
1
/ , 13 × 18
2