Error Messages When Saving A Pdf File - Ricoh IWB-D1 Field Service Manual

Message
"Cannot capture because the total
number of strokes has reached
90000."
"Either delete some strokes or
pages to reduce the total number
of strokes."

Error messages when saving a PDF file

Message
"You do not have the rights to write
to the inserted USB memory."
"Cannot write because a file with
the same name already exists."
"Try again after deleting the file."
"Failed to save the file."
"Try again after checking the USB
memory connection, free disk
space, the presence of write
protect etc."
"Failed to save the PDF."
"Check the USB memory
connection and try again."
"Failed to send the e-mail because
the size of the attached file is too
large."
"Use the [Save in USB Memory]
function."
Cause
There are a total of 90,000
strokes currently drawn on all
the pages.
Cause
Write authority is not given to
the chosen USB memory when
saving (only in case of Remote
Viewer).
There is already a file with the
same name that you want to
save.
The USB memory is not
connected, there is no space
available on the USB memory,
or write protection is applied
to the USB memory.
The USB memory may have
been removed during saving
the PDF file to the USB
memory.
Since the size of the attached
file was over the upper limit,
transmission of e-mail failed.
Error messages
Solution
Delete some strokes on a
page, or delete a page.
Solution
Give permission for writing in
the properties of the USB
memory (only in case of
Remote Viewer).
After deleting the existing file,
do the operation again.
After checking the connection,
availability, the existence of
write protection, etc. of the
USB memory, do the
operation again.
Check the connection of the
USB memory, and try again.
Use the USB memory saving
function.
117