Table of Contents
Advertisement
4. System Maintenance
Import procedure
1.
Copy the exported data (ZIP file) to the root of the USB memory. Insert the USB memory
into the USB port of the main part, and open [Import Device Configuration] in the
administrator setting application.
2.
Select [OK] when the following screen comes up.
3.
When the following screen is displayed, select [OK] after selecting the setting file to
import.
If [OK] is clicked in the setting file selection screen, it will change to the following screen.
The following screen is displayed when there is no setting file in the root of the USB memory. If the
[OK] button is clicked, it will return to the administrator setting application screen.
110
Advertisement
Table of Contents
Troubleshooting
