• Controller box
• Accessories
• LCD controller board
• LCD operation board + button
• Body power supply board (PSU)
• The following two parts around the LCD controller board (Guide cover)
Replacement procedure
1.
Remove the main part from the stand (wall mount).
2.
Remove the stand mounting bracket (wall mounting bracket) from the back of the main
part.
3.
Remove the following parts from the old main part, and attach them to the new display.
• Controller box (page 51 "Controller box")
• Accessories
• LCD controller board (page 55 "LCD control board")
• LCD operation board + button (page 59 "Operation board")
• Body power supply board (PSU) (page 59 "PSU")
• Two parts around the LCD controller board (Guide cover) (page 49 "Rear left cover")
4.
Turn the power on, and perform Color Profile setting.
Parts replacement procedures
(page 74 "Service mode
")
71