Messages Printed On The Error Logs Or Reports When You Use The Printer Function - Ricoh Aficio MP C6503SP User Manual

10. Troubleshooting
Message
"Unable to access the
specified memory storage
device."
Messages Printed on the Error Logs or Reports When You Use the Printer
Function
This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
When print jobs are canceled
Message
"91: Error"
"A function which cannot be
used with Fold mode was
set. The job has been
cancelled."
"A job via the network that
was not printed exists
because an error occurred.
It was stored as a job not
printed."
214
Cause
• An error occurred
when the machine
accessed the memory
storage device or a file
stored on the memory
storage device.
• An error occurred
when the user used the
Direct printing function
to print from a memory
storage device.
Cause
Printing was canceled by the
auto job cancel function due
to a command error.
A print job was canceled
because a function(s) not
available with Fold was
selected.
Jobs with errors were stored
because an error occurred
with a print job via the
network while the error job
storing function was
enabled.
Solution
Save the file to a different memory
storage device, and then print again.
Solution
Check that the data is valid.
Cancel the function(s) not available
with Fold. For details about the
functions not available with Fold, see
"Fold", Print.
Contact your administrator to check
whether the machine is connected
correctly to the network. For details
about how to check and print jobs
stored when print configuration errors
occur, see "Printing of Documents
Stored When Print Configuration Errors
Occur", Print.