Table of Contents
Advertisement
4. System Maintenance
13.
Check that the shadow from the blocked sensor appears at the following area of the
Sensor Level dialog of the left position sensor.
14.
Check whether the shadow from the blocked sensor is in the normal position (left-hand
side of the yellow line on the screen). When it is not in the normal position, adjust until the
yellow line comes to the normal position (within the right side of the shadow) by
increasing/decreasing the value of [llast] in the Camera Scope dialog.
Normal position
[llast] of the Camera Scope dialog
88
Advertisement
Table of Contents
Troubleshooting
