Digital Alarm Communicator Transmitter (Dact-E3) Connections; 1: Central Station Reporting - Honeywell Gamewell-FCI E3 Series Installation & Operation Manual

E3 Series System Connections
3.10 Digital Alarm Communicator Transmitter (DACT-E3)
Connections
The DACT-E3 digital communicator transmitter is an optional sub-assembly that features
numerous formats for the communication to a central station. It provides the following functions:
Line seizure - takes control of the phone lines, disconnecting any premises phones using the
same lines
Verify that data has been accepted by the Central Station
Remote via the RS-485 serial interface
3.10.1 Central Station Reporting
UL Listed receivers compatible with the E3 Series
Silent Knight
Silent Knight
Ademco
Sur-Guard
(Version. 1.64 or higher)
Osborne Hoffman
If you are using the Model 9000 and the message, "HELP," appears on the printer after attempting
to download, the 9000 software must be upgraded.
The Model 9000 must have the Model 9307 software package, Revision 900501 or later, to print the
PROGRAMMING PASS and PROGRAMMING FAIL messages.
144
Manufacturer
Table 3.10.1.1 UL Listed Receivers Compatible with the E3 Series
E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10

Digital Alarm Communicator Transmitter (DACT-E3) Connections

are listed in Table 3.10.1.1.
Receiver Model
Model 9000.
Model 9800/9500
Model 685
SG-MLR2-DG
Quickalert
Formats
SIA-8
SIA-20
SK4/2
3/1 14
3/1 23
SIA-8
SIA-20
SK4/2
3/1 14
3/1 23
Contact ID
3/1 14
3/1 23
SIA-8
SIA-20
SK4/2
3/1 14
3/1 23
Contact ID
SIA-8
SIA-20