Cabinet A2, Inner Door Installation - Honeywell Gamewell-FCI E3 Series Installation & Operation Manual

Cabinets

2.5.2.5 Cabinet A2, Inner Door Installation

1. Mount the inner door and secure with four (4), #6-32 nuts in the four-hole mounting pattern as
shown in Location 1 of the figure below.
2. Secure the opposite end of the bonding wire to the welded #6 stud on the inner side of the inner
door using the #6 nut as shown in Location 2 of the figure below.
3. After the panel is wired, use the thumbscrews to secure the inner door to the backbox as shown
in Location 3 of the figure below.
CABINET A2,
INNER DOOR
E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10
BONDING
WIRE
2
LCD-E3
KEYPAD
1
3
1
3
Figure 2.5.2.5.1 Cabinet A2, Inner Door Installation
NUT, HEX
(#6-32)
8 PLACES
2
1
1
1
THUMBSCREWS
TO SECURE THE
INNER DOOR TO
THE BACKBOX
Installation
1
31