Reporting Codes For Non-Slc-Device Events - Honeywell Gamewell-FCI E3 Series Installation & Operation Manual

Digital Alarm Communicator Transmitter (DACT-E3) Connections

3.10.5.1 Reporting Codes for Non-SLC-Device Events

For events that do not originate on SLC devices, the DACT-E3 reports extended codes in the range
900-999. These codes are not user-configurable. Figure 3.10.5.1.1 lists the extended codes.
Code
000 Phone Line Test
001 - 899 SLC Device Codes
900 Reserved
901 SLC 1
902 SLC 2
903 NAC 1
904 NAC 2
905 Municipal Circuit
906 Aux Power Fault
907 Municipal Circuit Supervision
908 Positive Ground Fault
909 Negative Ground Fault
910 RS-232 Supervision Fault
911 Annunciator Fault
912 PM-9/PM-9G Supervision
Fault
913 Battery Low
914 Battery Fault
915 AC Fault
916 DC Fault
917 Reserved
918 Battery Charger Fault
919 - 924 Reserved
925 DACT Account 1 Fault
926 DACT Missing
927 DACT Report Timeout
928 DACT Account 2 Fault
929 DACT Line 1 Fault
930 DACT Line 2 Fault
931 INI Communication Fault
932 INI Node Number Fault
933 Net Port 1
934 Net Port 2
935 - 950 Reserved
951 - 981 Cross Zone 1 - 31
982 Node Missing Faults
983 Node Extra Faults
984 LCD Display Faults
985 ASM/ANU Faults
986 External Faults
987 - 999 Reserved
991 Test with Exception
992 - 999 Reserved
Table 3.10.5.1.1
E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10
Event
Automatic DACT test OK.
User-defined in device configuration
Loop Break, Short, or Disconnect
Loop Break, Short, or Disconnect
Fault, Short, or Disconnect
Fault, Short, or Disconnect
Master Box Trouble
Resettable or Non-Resettable B+ Fault
Issued if node address DIP switches do not match the node number
in the node's configuration.
Cross Zone 31 (981) is used to report Group Cross Zone Events.
Node not reported
Node not reported, reports only when Extra Node enabled
Address not reported
Address not reported
e.g. INI-VG troubles that have no ILI equivalent
Automatic DACT test OK, but Trouble condition present in the system.
Non-SLC Device Events Reporting Codes
E3 Series System Connections
Comment
149