2: Telephone Requirements; 3: Specifications - Honeywell Gamewell-FCI E3 Series Installation & Operation Manual

Digital Alarm Communicator Transmitter (DACT-E3) Connections
3.10.2 Telephone Requirements
The REN is used to determine the quantity of devices that may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in response to an
incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5).
To be certain of the number of devices that may be connected to the line, as determined by the total
RENs, contact the Telephone Company to determine the maximum REN for the calling area.
3.10.3 Specifications
The following list the electrical specifications for the DACT-E3.
Operating Voltage:
Operating Current:
Alarm Current:
Operating Temperature: 32° to 120° F (0° to 49° C)
Relative Humidity:
Supervised
Power-limited
E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10
24 VDC (from PM-9/PM-9G power supply)
0.018 amp
0.018 amp
0 to 93%, non-condensing at 90° F (32° C)
E3 Series System Connections
145