Cabinet A Or Aa, 3-Bay, Inner Door To The Backbox Installation - Honeywell Gamewell-FCI E3 Series Installation & Operation Manual

Installation

2.5.5.1 Cabinet A or AA, 3-Bay, Inner Door to the Backbox Installation

1. Place the nylon spacer (#10) over the backbox bottom hinge pin as shown in Location 1 of the
figure below.
2. Mount the inner door to the backbox by sliding the inner door, top hinge pin hole onto the
backbox top hinge pin as shown in Location 2.
3. Align the inner door bottom hinge pin hole with the backbox bottom hinge pin.
4. Slide the door over the inner door bottom hinge pin hole on top of the nylon spacer, and secure
using the #8 x .5" screw as shown in Location 2 of the figure below.
5. After the inner door is secured in place, attach the one end of the bonding wire to the top hinge
pin using the #8 x .5" screw as shown in Location 3 of the figure below.
NOTE: For information on the installation of the opposite end of the bonding wire, see Section
2.5.5.2, Step 3 and Location 4 of Figure 2.5.5.2.1.
CABINET A or
AA, 3-BAY,
INNER DOOR
Figure 2.5.5.1.1 Cabinet A or AA, 3-Bay Backbox Sub-Assembly Installation
42
CABINET A or AA,
3-BAY BACKBOX
BACKBOX TOP
HINGE PIN
INNER DOOR TOP
2
HINGE PIN HOLE
3
3
SCREW
BONDING
#8 x .5"
WIRE
SCREW
#8 x .5"
2
1
2
BACKBOX
BOTTOM
HINGE PIN
INNER DOOR
BOTTOM
HINGE PIN HOLE
E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10
Cabinets