After Operation; After Operation Safety; Operating The Machine After Mowing; Disengaging The Transmission - Toro Greensmaster eFlex 1021 Operator's Manual

After Operation

After Operation Safety

General Safety
• Shut off the machine, remove the key (if equipped), and wait for all movement to stop
before you leave the operator's position. Allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
• Clean grass and debris from the machine to help prevent fires.
• Allow the machine to cool before storing the machine in any enclosure.
• Do not store the machine where there is an open flame, spark, or pilot light, such as on a
water heater or on other appliances.

Operating the Machine after Mowing

1. Drive the machine off of the green, push down on the handle to raise the cutting unit,
release the clutch bail, disengage the cutting unit, and shut off the machine.
2. Remove the grass basket and empty the basket of clippings.
3. Install the grass basket on the machine and transport the machine to storage.

Disengaging the Transmission

You can disengage the drum from the transmission to allow the machine to be maneuvered.
Disengage the transmission when you need to move the machine without starting it (e.g.,
performing maintenance in an enclosed area). Before you operate the machine, ensure that
you engage the transmission.
Traction-engagement lever—D
Operation: After Operation
G404730
position
ISENGAGED
Page 5–6
Transmission gearbox
3460-892 A