Toro Z Master Professional 5000 Series Operator's Manual page 47

Figure 59
1. Positive (+) cable on
discharged battery
2. Positive (+) cable on
booster battery
3. Negative (–) cable on the
booster battery
4. Negative (–) cable on the
engine block
4. Connect the other end of the positive cable to
the positive terminal of the booster battery.
5. Connect the black negative (–) cable to the other
terminal (negative) of the booster battery.
6. Make the final connection on the engine
block of the stalled vehicle (not to the
negative battery post) away from the battery
and stand back (Figure
Figure 60
Figure 61
1. Engine block
g012785
5. Booster battery
6. Discharged battery
7. Engine block
61).
g024213
g013117
2. Negative (–) cable
7. Start the vehicle and remove the cables in the
reverse order of connection (the engine block
(black) connection is the first to disconnect).
47