Replacing The Hydraulic-Pump Drive Belt - Toro Z Master Professional 5000 Series Operator's Manual

Figure 79
1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ensure that the belt-guide
tab hits against the pivot
hub.
10. Rotate and ensure the belt-guide tab hits against
the pivot hub Figure
11. Using the ratchet in the square hole, install the
idler spring (Figure
Make sure the spring ends are seated in the
anchor grooves.
12. Install the belt covers
5. Belt guide
6. Spring-loaded idler pulley
7. Square hole in the idler
arm for the ratchet
8. Spring
79.
79).
(Figure 80).
Replacing the
Hydraulic-Pump Drive
Belt
g024146
1. Disengage the blade-control switch (PTO) and
set the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove mower belt; refer to
Mower Belt (page
4. Raise the machine and support it with jack
stands (Figure
56
Figure 80
Replacing the
55).
81).
g027730