Cleaning The Hydraulic Units - Toro Z Master Professional 5000 Series Operator's Manual

1. Engine guard
2. Engine air-intake screen
3. Bolt
Cleaning the Hydraulic
Units
Service Interval: Before each use or daily
1. Disengage the blade-control switch (PTO) and
set the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Raise the seat.
4. Clean the debris and grass from the hydraulic
units (Figure 75).
5. Lower the seat.
Figure 74
4. Fan housing
5. Screw
g004218
1. Hydraulic units
53
Figure 75
g024214
g009920