Product Overview; Controls - Toro Z Master Professional 5000 Series Operator's Manual

Product Overview

1. Height-of-cut deck lift
pedal
2. Transport lock
3. Parking-brake lever

4. Controls

5. Motion-control levers
Controls
Become familiar with all the controls before you start
the engine and operate the machine
Figure 5).
Figure 4
6. Roll bar
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
(Figure 4
1. PTO switch
2. Throttle control
3. Malfunction indicator light
(MIL)
g027405
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance
Fuel Gauge
The fuel gauge is located with the hour meter and
the bars light up when the ignition switch is in the O
position (Figure
and
The indicator light appears when the fuel level is low
(approximately 1 gallon remaining in the fuel tank).
Safety-Interlock Indicators
There are symbols on the hour meter and the indicate
with a black triangle that the interlock component is in
the correct position
Battery-Indicator Light
If the ignition key is turned to the O
seconds, the battery voltage will be displayed in the
area where the hours are normally displayed.
The battery-indicator light turns on when the ignition
switch is turned to the O
charge is below the correct operating level
14
Figure 5
4. Hour
meter/Safety-interlock
display/Fuel gauge
5. Ignition switch
6. Fuses
(Figure 6).
6).
(Figure 6).
N
position and when the
N
g013112
N
position for a few
(Figure 6).