Wan Settings - Furuno FELCOM251 Operator's Manual

6. SETTINGS ON WEB INTERFACE
6.8

WAN Settings

The FELCOM251/501 provides multiple WAN groups which have independent data
connection with different filtering policy for the connected equipment. So you can
make your own groups, like a group for business use and a group for private use. The
network administrator is responsible for the group/network design.
1. Referring to section 6.1, login as an Administrator.
2. Click [Admin] in the menu bar.
3. Click [Network Settings].
4. Click [WAN].
5. Click [Groups] to show the [Groups] menu.
Item
Delete button
Add group button
Connection Type
Group Name
APN
WAN IP
Settings button
6-16
Delete the item having a checkmark [ ].
Put a [ ] in the box on the left side of the item to delete.
It is not possible to delete the groups that have an active data con-
nection.
Create a new WAN group. Up to ten groups can be created. The
creation pop-up window appears.
Shows "Router", "AT Command", "PPPoE", or "Bridge".
Shows the registered group name.
Display Access Point Name. (If an Access Point registered in the
SIM card is used: "(SIM) Access Point Name" appears.)
• Data connection in use: WAN IP address appears.
• Not connected: "--" appears.
Shows the group setting screen.
You can check or edit the registered contents in each group.
Description