6.8.4
How to register/edit WAN group as "AT Command"
With "AT Command", you can set, connect, or disconnect the data line by the com-
mand sent from the device connected to the FELCOM 251/501.
1. Referring to section 6.1, login as an Administrator.
2. Click [Admin], [Network Settings], [WAN], then [Groups].
3. Click [Add group].
The following pop-up window appears.
To edit a WAN group, click the [Settings] button for the WAN group to edit. Edit
the settings referring to this step and later.
4. Referring to the following table, set up the connection type and the group name.
Item
Connection Type
Group name
Next button
Cancel button
5. Click the [Next] button.
Select "AT Command".
Input the group name.
Go to the next step.
Close the pop-up window.
6. SETTINGS ON WEB INTERFACE
Description
Registered/available count
Registered/available count
Registered/available count
6-33