Network Settings - Furuno FELCOM251 Operator's Manual

3. SETTINGS FOR IP HANDSET
3.6.1

Network settings

You can make the network settings for the IP Handset and the Communication Unit.
For IP Handset
1. In the [Admin Settings] menu, press
the Enter key.
The [Network] menu appears.
2. Press
The [HS TCP/IP] screen appears.
3. Press
• [Auto]: the system automatically assigns an IP address to the handset. If you
select [Auto], the Communication Unit must also have DHCP enabled (see
section 6.6.1). Go to step 16.
• [Manual]: allows you to manually set the IP address for the handset. Continue
to the next step in this procedure.
4. With the IP Address field selected, press
address.
5. Press the 0 to 9 key to input a part of the IP address in the cell.
6. Repeat steps 5 and 6 to input the IP address in the cells.
7. Press
3-12
to select the [HS TCP/IP] menu, then press the Enter key.
or to select [Auto] or [Manual], then press the Enter key.
or to select the [Subnet Mask] field.
to select the [Network] menu, then press
or to select a cell to input the IP