How To Use Local Time; Operations For Communication Unit - Furuno FELCOM251 Operator's Manual

3.3.2

How to use local time

To use local time, do the following:
1. In the [Time] screen, press
2. Press
3. Press
4. Press
5. Press
6. Press
7. Press the Enter key do display the [DST] screen.
8. Press
When you select [ON], the time advances one hour.
9. Press the Enter key to confirm the settings.
The message "Applied." appears.
10. Press the
3.4

Operations for Communication Unit

This section explains the following contents:
• How to display the [Status] screen
• How to search for a satellite
• How to connect/disconnect the data line
1. At the main screen, press the Enter key to open the main menu.
2. Press
The [Comm. Unit] menu appears.
to select [ON].
or to select the [UTC] field for hour.
or to set the time difference for hour (-12 to +13).
or to select the [UTC] field for minute.
or to set the time difference for minute (00, 15, 30, 45).
or to select [OFF] or [ON], then press the Enter key.
key to go back to the main screen.
, , or to select the [Comm. Unit] menu, then press the Enter key.
3. SETTINGS FOR IP HANDSET
or to select the [Time Offset] field.
3-5