How To Use A Message In The Outbox - Furuno FELCOM251 Operator's Manual

5. WEB INTERFACE
5.6.5

How to use a message in the outbox

You can edit and resend an already sent message from the outbox.
1. Click [SMS] in the menu bar.
2. Click [Outbox] in the sub menu to show the [Outbox] menu.
Date on which the
message was sent.
3. Click the sent date and time to select the message to edit and resend.
Detailed information about the message appears.
See the following table for operation information:
Operation
Edit the message and send
to a recipient.
5-20
Recipient's phone number.
If the recipient is recorded
as a contact, the recipient's
name also appears here.
1) Click the [Copy & edit] button.
The [Create New Message] menu opens with the orig-
inal recipient message in the [Message] field.
2) Edit the phone number in the [To] field, or click [Con-
tacts] to change the recipient.
3) Put a [ ] in the box at the left side of [Delivery notifi-
cation], if necessary.
4) Click the [Encode] box, then select [GSM] or [Uni-
code].
5) Edit the message in the [Message] field.
6) Click the [Send] button to send the message.
7) Click the [Close] button.
Total message count Total message count Total message count
Message status.
Procedure