Table of Contents
Advertisement
Studer Innotec SA
Xcom-SMS
3
MATERIAL NEEDED FOR THE INSTALLATION
3.1
C
ONTENTS OF THE
The communication set Xcom-SMS contains the following material:
1 Quick guide
1 Xcom-SMS with antenna
1 communication cable, 2m
1 micro SD card with adapter (contains
product documentation in pdf-format as
well as the Xcom-SMS configuration
software.)
Mounting plate
3.2
A
DDITIONAL ITEMS
In addition to the material delivered with the communication set the use of an Xcom-SMS
necessitates a micro SIM card as well as a mobile phone that can send and receive SMS
messages. During installation there is also need for a computer and a slot headed screwdriver.
4
INSTALLATION
There are two phases in installing an Xcom-SMS:
1.
Configuration of the Xcom-SMS, using the Xcom Configurator software supplied on
the micro SD card
2.
Wiring of the module
4.1
C
ONFIGURATION OF THE
Your Xcom-SMS module needs to know the PIN code of your micro SIM card in order to send SMS
messages, just as a mobile phone. You also have to enter the phone number linked with this micro
SIM card. During this phase you may also enter a test mobile phone number to which test SMS
messages, operating reports of your system and alarms will be sent.
To store these data in the Xcom-SMS you will have to use the micro SD card supplied with the
device.
8
X
-SMS
COM
COMMUNICATION SET
X
-SMS
COM
V 1.0.0
User manual
Advertisement
Table of Contents
