Example of SMS to configure
the time and day of sending
the report
7.5.4 Receive a list of subscribers to the report
This command makes it possible to receive a list of all subscribers to a report. This way it is possible
to know who receive which report. This command is very convenient when the administrator of a
system does not know which users are subscribed to which report.
Format:
report (<n>) on ?
(<n>)
Optional
Report identifier based on this format:
r1:
r2:
If not specified the report 1 ("short") is used by default
Example of command to receive a list of subscribers to the report:
Command
report on ?
report r1 on ?
report r2 on ?
Example of SMS to receive the
list of subscribers to the long
report
7.5.5 Receive a report instantly
This command sends the required operating report instantly to the user. The module only sends
the report to the sender of the SMS.
Format:
report (<n>) ?
(<n>)
Optional
Report identifier based on this format:
r1:
r2:
If not specified the report 1 ("court") is used by default
User manual
report 1 ("short")
report 2 ("long")
Functioning of the Xcom-SMS
Sends the subscribers list to the report by default (short)
Sends the subscribers list to the short report
Sends the subscribers list to the long report
report 1 ("short")
report 2 ("long")
123456 report
mo,we,fr,sa,su,19:30
Xcom-SMS
- cmd report: r1
configuration success
123456 report r2 on ?
Xcom-SMS
- cmd report: r2
subscribers =
+41791234567
+41781122338
V 1.0.0
Studer Innotec SA
Xcom-SMS
27