Table of Contents
Advertisement
Studer Innotec SA
Xcom-SMS
1.3.2 Disclaimer of liability
Installation, commissioning, use and maintenance of this device cannot be supervised by the
company Studer Innotec SA. For this reason, we do not accept any liability for damages, costs or
losses generated either by an installation that is not conforming to the prescriptions, by a defective
operation or by poor maintenance. The use of this device is under the responsibility of the end-
user. This device is neither designed nor guaranteed for the supply of life support applications or
any other critical application with potential risks for human beings or for the environment. We shall
assume no liability for patent infringement or other third party rights involved in the use of this
device.
1.3.3 Compatibility
Studer Innotec SA guarantees the compatibility of the software updates with the hardware for
one year, starting from the date of purchase. The updates are no longer guaranteed beyond this
date and a hardware upgrade may be required. Please contact your reseller for any additional
information on compatibility.
1.4
S
AFETY PRECAUTIONS
1.4.1 Generalities
Carefully read all safety instructions before proceeding with the installation and commissioning of
the device. Failure to follow these instructions might constitute a lethal physical danger but can
also damage the functionalities of the device. Therefore this manual should always be kept close
to the device.
For any installation, the local and national norms and regulations in force must be
strictly followed.
1.4.2 Warnings
Wherever the system, the person in charge of installation and commissioning must know
the safety measures and the prescriptions in force in the country. Therefore, the whole
maintenance must be carried out by qualified personnel.
All components connected to this device must be conforming to the laws and
regulations in force. Persons without a written authorization from Studer Innotec SA are
forbidden to do any changes, modifications or repairs whatsoever. Regarding authorized
modifications and replacements, only genuine components shall be used.
This device is meant for indoor use only and must under no circumstances be exposed to
rain, snow or any other humid or dusty environment.
If used in motor vehicles, this device must also be protected against vibrations by shock
absorbing components.
6
V 1.0.0
User manual
Advertisement
Table of Contents
