Access To The System's Parameters By Sms - Studer Xcom-SMS User Manual

Examples of "relay" commands:
Command Functioning of the Xcom-SMS
relay 1=on Activates the auxiliary relay 1
relay 2=off Deactivates the auxiliary relay 2
relay 1=auto Auxiliary relay in automatic mode
relay 2=inv Auxiliary relay in automatic reversed mode
Example of SMS to activate the
auxiliary relay 1.
Example of SMS to deactivate
the auxiliary relay 2.
Example of SMS to configure
the auxiliary relay
automatic mode.
Example of SMS to configure
the auxiliary relay 2 in reversed
automatic mode.
7.9 A
CCESS TO THE SYSTEM
It is possible to access the parameters of your system by SMS. There are two available commands:
one to write one or several parameters and one to read one or several parameters. These are two
separate commands. It is not possible to write and read parameters with the same SMS.
For both commands the maximal number of parameters is 10.
User manual
1 in
'
S PARAMETERS BY
V 1.0.0
123456 relay1=on
Xcom-SMS
- cmd relay:
relay1=manual on
123456 relay2=off
Xcom-SMS
- cmd relay:
relay2=manual off
123456 relay1=auto
Xcom-SMS
- cmd relay:
relay1=automatic
123456 relay2=inv
Xcom-SMS
- cmd relay:
relay2=reversed automatic
SMS
Studer Innotec SA
Xcom-SMS
35