Acknowledgement Of Receipt; Sms Format - Studer Xcom-SMS User Manual

6.3 A
CKNOWLEDGEMENT OF RECEIPT
Each message received by the Xcom-SMS will generate a return message that acknowledges
whether the SMS has been processed. It is possible to deactivate the return message function with
the command "smsrsp", see chapter 0.
If an SMS is sent with incorrect formatting or in a format unknown to the Xcom-SMS, the system will
return an error message by SMS if it is possible to identify the sender. The error message has this
format:
6.4 SMS
FORMAT
SMS messages sent to the Xcom-SMS must have the following format:
 The SMS should always start with the system access code <key>. The access code is
followed by one or several commands.
 The following characters are authorized in the SMS commands:
Lower case letters 'a' to 'z'
o
Upper case letters 'A' to 'Z'
o
Numbers '0' à '9'
o
Special characters; namely:
o




When the Xcom-SMS receives an SMS it starts by verifying the access code <key>. If the access
code is correct the commands contained in the SMS will be controlled and then executed.
User manual
Xcom-SMS Error : wrong sms format
'.'
','
'?'
'='
V 1.0.0
Studer Innotec SA
Xcom-SMS
19