Table of Contents
Advertisement
1
INTRODUCTION
1.1
T
HE COMMUNICATION MODULE
This user manual contains a complete description of the functioning of the communication
module Xcom-SMS.
The communication module Xcom-SMS makes it possible to access systems with Studer Innotec
devices through SMS (Short Message Service) sent from a mobile phone, a web site, etc. It
provides the user with a tool that gives easy access to the system in order to know its current state
and to control it remotely reducing the necessity to physically go to the site.
1.2
C
ONVENTIONS
1.2.1 Symbols
This symbol is used to indicate a risk of material damage.
This symbol is used to indicate information that is important or which serves to
optimize your system.
1.3
W
ARRANTY AND LIABILITY
During production and assembly, each Xcom-SMS undergoes several controls and tests. These are
carried out in full respect of fixed procedures. Each Xcom-SMS is given a serial number allowing a
perfect follow-up of the controls, in conformity with the specific data of every device. For this
reason, it is very important to never remove the descriptive sticker bearing the serial number. The
production, the assembly and tests of each Xcom-SMS are entirely carried out in our factory in
Sion (CH). The warranty of this product depends on the strict following of the instructions in this
manual. The warranty period for the Xcom-SMS is 5 years as from its production date.
1.3.1 Disclaimer of warranty
No warranty will be applied for damages caused by handling, operation or actions that are not
described in this manual. Damages arisen from the following events are not covered by the
warranty:
Overvoltage on the device.
Liquid in the device or oxidation due to condensation.
Failures due to a fall or to a mechanical shock.
Modifications made without the explicit authorization of Studer Innotec SA.
Nuts or screws partially or insufficiently tightened during installation or maintenance.
Damages due to atmospheric overvoltage (lightning).
Damages due to transport or improper packaging.
Disappearance of original marking items.
User manual
X
-SMS
COM
V 1.0.0
Studer Innotec SA
Xcom-SMS
5
Advertisement
Table of Contents
