Sending Events By Category - Studer Xcom-SMS User Manual

Studer Innotec SA
Xcom-SMS
Example of SMS to subscribe to
events.
Example of SMS to unsubscribe
to events.

7.6.2 Sending events by category

This command makes it possible to configure the sending of events occurred at the system by
category (see chapter 7.6).
Format: event <category>=<state>(,<category>=<state>)
<category> At least 1
Event categories:
ntf:
wrn:
err:
hlt:
<state> At least 1
Indicate whether to receive events of this category or not, 2 possible values:
on:
off:
Example of "event" commands for configuration by category:
Command
event ntf=on,wrn=on,err=on,hlt=on
event ntf=off,wrn=off,err=off,hlt=off
event ntf=off,wrn=off,err=on,hlt=on
event ntf=on
30
notification
warning
error
halted
activated category
deactivated category
Functioning of the Xcom-SMS
For every event that occurred on the system an SMS
will be sent to the subscribers.
No SMS will be sent to the subscribers no matter what
events occur at the system.
Events within the categories "error" or "halted" that
occurred on the system will be sent by SMS to the
subscribers.
Sends an SMS when an event in the category
"notification" occurs. It does not change the
configuration of events in other categories.
123456 event on
+41791234567
Xcom-SMS
- cmd event: subscribe
+41791234567
123456 event off
+41791234567
Xcom-SMS
- cmd event: unsubscribe
+41791234567
V 1.0.0 User manual