State On / Off Of A Device; Turn On / Off A Device - Studer Xcom-SMS User Manual

7.7 S ON / OFF
TATE
It is possible to change the state ON/OFF of the devices of your Xtender system by SMS. You may
also receive their state.

7.7.1 Turn ON / OFF a device

This command makes it possible to turn on or turn off a device remotely by SMS depending of its
type. All devices of the same type will receive the same command and have the same state once
the command is executed.
Format: sys <device>=<state>(,<device>=<state>)
<device> At least 1
Device to be turned on or turned off based on the following format:
xt:
vt:
vs:
all:
<state> At least 1
off:
on:
Examples of "sys" commands:
Command Functioning of the Xcom-SMS
sys xt=on Turns on all Xtenders in the system
sys vt=off Turns off all VarioTracks in the system
sys vs=on, xt=off Turns on all VarioStrings and turns off all Xtender in the system
sys all=on Turns on all Xtenders, all VarioTracks and all VarioStrings in the system
sys all=off Turns off all Xtenders, all VarioTracks and all VarioStrings in the system
Example of SMS to turn on
devices in the system.
Example of SMS to turn off
devices in the system.
User manual
OF A DEVICE
Xtender
VarioTrack
VarioString
all of the above listed devices
turn off
turn on
123456 sys xt=on
Xcom-SMS
- cmd sys: xt=on
123456 sys all=off
Xcom-SMS
- cmd sys: xt=off vt=off
vs=off
V 1.0.0
Studer Innotec SA
Xcom-SMS
33