Table of Contents
Advertisement
You need to :
When the module is connected, the signalisation LED (b) blinks green 2x
repeatedly.
10
ERROR MESSAGES IN RELATION WITH THE XCOM-SMS
If a command sent by the user is incorrect the Xcom-SMS will send an error message in return.
Below you will find a list of error messages specific to the Xcom-SMS.
User ref.
Description
190
The Xcom-SMS is busy
191
Parameter not supported
192
Unknown reference
193
Invalid value
194
Value too low
195
Value too high
196
Writing error
197
Reading error
198
User level insufficient
199
No data for the report
200
Memory full
User manual
1. Check the fixing of the antenna. It should be tightened manually.
2. Check the network coverage with a mobile phone
3. Change location of the Xcom-SMS until it can connect to the GSM
network
V 1.0.0
Studer Innotec SA
Xcom-SMS
41
Advertisement
Table of Contents
