Setting Up And Connection; Connecting The Ac Adapter And Power Cord - Roland MODELA MDX-15 User Manual

4 Setting Up and Connection

WARNING
Do not use with any power supply other than the dedicated AC adapter.
Use with any other power supply may lead to fire or electrocution.
WARNING
Do not use with any electrical power supply that does not meet the ratings dis-
played on the AC adapter.
Use with any other power supply may lead to fire or electrocution.
WARNING Use only with the power cord included with this product.
Use with other than the included power cord may lead to fire or electrocution.
WARNING
Ground the unit with the ground wire.
Failure to do so may result in risk of electrocution in the event of a mechanical
problem.
CAUTION
Install on a stable surface.
Failure to do so may result in falling of the unit, leading to
injury.
NOTICE
Never install this unit in any of the following situations, as it could result in damage:
• Places where the installation surface is unstable or not level.
• Places with excessive electrical noise..
• Places with excessive humidity or dust.
• Places with poor ventilation, because the MODELA generates considerable heat during operation.
• Places with excessive vibration.
Use within a temperature range of 5 to 40°C (41 to 104°F) and within a humidity range of 35 to 80%.
Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation. Doing so may lead to faulty operation or breakdown.

Connecting the AC Adapter and Power Cord

Connect in the order of the numbers shown in the figure.
10 cm (4 in.)
* Do not place any object within the area
30 cm (12 in.)
AC adapter jack
30 cm (12 in.)
Power cord
10 cm (4 in.)
4 Setting Up and Connection
AC adapter
9