Roland MODELA MDX-15 User Manual page 6

CAUTION
Wear dust goggles
and mask during use.
Cutting dust may scat-
ter, causing bodily in-
jury.
Do not injure or modi-
fy the electrical power
cord, nor subject it
to excessive bends,
twists, pulls, binding,
or pinching, nor place
any object of weight on it.
Doing so may damage the electrical power
cord, leading to electrocution or fire.
When unplugging the
electrical power cord
from the power outlet,
grasp the plug, not
the cord.
Unplugging by pulling
the cord may damage
it, leading to fire or electrocution.
Do not allow liquids,
metal objects or flam-
mables inside the ma-
chine.
Such materials can
cause fire.
Do not touch the tip of
the cutting tool with
your fingers.
Doing so may result in
injury.
Do not allow children
to operate without
adult supervision or
operate within reach
of young children.
Doing so may result in
injury.
4
To Ensure Safe Use
CAUTION
D u r i n g c u t t i n g o r
scanning, do not place
hands near the cutting
tool or the probe.
Doing so may result in
injury.
While the power is
on, do not remove the
spindle unit from the
carriage.
Doing so may result in
injury.
Store clay out of the
reach of children.
When you're finished,
wash your hands to
rinse away all cut-
tings.
In case of emergency,
immediately unplug
the AC adapter.
Do not operate if a
transparent cover is
cracked or broken.
If the transparent cover
at the front or the side
of the unit is cracked,
contact a service agent immediately for re-
pairs.
Use a commercially
available brush to re-
move metal cuttings.
Attempting to use a
vacuum cleaner to take
up metal cuttings may
cause fire in the vacuum cleaner.