Roland MODELA MDX-15 User Manual page 63

Create a Raised Engraving (Relief)
Add thickness to shapes and text to create a relief.

Click the shape or text string you want for adding thickness to select it.

Click the .
The [Relief Size] dialog box appears.
The dialog box may differ depending on the type of object you selected. The following screen shows the
dialog box that appears when creating a relief of shapes or text.
Make the settings for the required items for creating the relief, then click [OK].
This is for entering the direction of the relief
ridge. You can enter a value when a button
other that
When this is selected, the relief of
the chosen object is smoothed.

These choose whether to push down or stack
using the value entered for the relief height.
This is for entering the angle of the base side
when has been selected.
has been selected.
The display changes automatically to the screen at right, and a three-
dimensional view of the shape of the relief appears.
This is called the "3D screen," and it displays the shape of the relief
and the tool path. You cannot edit shapes or text.
Enter the height of the bottom of the relief.
Enter the thickness of the relief.
These choose the configuration for
pushing the object up (or down).
These choose how to stack the relief.
9 Software Guide 61