Roland MODELA MDX-15 User Manual page 16

Driver for Windows NT4.0/2000/XP

Open the [Printers] folder.
Windows NT4.0/2000:
Click [Start]-[Settings]-[Printers].
Windows XP:
Click [Start]-[Control Panel]. Click [Printers and Other Hardware], then click [Printers and
Faxes].




14 5 Installing the Software
Right-click on the Roland MODELA MDX-20 icon, then
click [Properties].
The [Roland MODELA MDX-20 Properties] dialog box appears.
Click the [Ports] tab. For [Port], choose an unused port
other than [COM1]. Click [Configuration Port].
> Windows NT 4.0: go to step 4
> Windows 2000/XP: go to step 5
Click the port you chose in step 3, then click [Settings].
Make the settings for the following communication param-
eters. Click [OK].