Roland MODELA MDX-15 User Manual page 18



If You're Using Windows NT4.0/2000/XP
If the printer port for the Windows driver and the communication port for Dr. PICZA are set to the same port, you
cannot use Dr. PICZA.
To perform scanning, you need to temporarily set the Windows driver printer port to a different port. After you
finish scanning, return the setting for the Windows driver to its original value.
Dr.Engrave


16 5 Installing the Software
From the [File] menu, click [Preferences...].
The [Preferences] dialog box appears.
Select the port where the cable is connected, then click
[OK].
Click [Start]. Point to [Roland Dr.Engrave] and click [Dr.
Engrave].
From the [File] menu, click [Print Setup...].
The [Print Setup] dialog box appears.