Table of Contents
Advertisement
Basic Maintenance Knowledge
Types and Timing of Maintenance
To use this machine under its optimal conditions, it is important to perform the appropriate maintenance
at the appropriate times.
Regular Maintenance
These are the maintenance items that are required on a daily basis.
Timing
Before daily operations
During and after daily operations
If the discharged fluid disposal message
appears
Once a month
Advanced Maintenance
These maintenance methods consume a large amount of ink. Thoroughly read the explanation, and then
perform the operation at the appropriate point in time.
Timing
When dot drop-out or dot displacement
occurs
When the white ink concentration drops Eliminating drops in ink concentration
When manual cleaning is not effective
Replacing Consumable Parts
These items are for replacement of consumable parts. Thoroughly read the explanation, and then perform
the operation at the appropriate point in time.
Timing
When a replacement message appears
When a cutting edge becomes dull
222
Introduction
Category
Maintenance of ink cartridges
Cleaning of the print heads
Cleaning the machine
Manual cleaning
Disposing of discharged fluid
Cleaning the UV-LED device
Category
Cleaning of the print heads
Eliminating uneven colors, dot drop-
out, and dot displacement
Category
Replacing consumable parts
• Wiper
• Felt wiper
• Blade
• Separating knife
Item
P. 229Maintenance of Ink Cartridg-
es
P. 230Printing Tests and Normal
Cleaning
P. 226Cleaning the Machine
P. 232Manual Cleaning
P. 252If the Discharged Fluid Dis-
posal Message Appears
P. 244How to Clean the UV-LED
Devices
Item
P. 230Printing Tests and Normal
Cleaning
P. 255Medium Cleaning Method
P. 257Powerful Cleaning Method
P. 260Manual Cleaning Method
P. 273Light Choke Cleaning Meth-
od
P. 279Handling Severe Dot Drop-
out, Dot Displacement, and Un-
even Colors
Item
P. 287Replacing the Wiper
P. 291Replacing the Felt Wiper
P. 294Replacing the Blade
P. 301Replacing the Separating
Knife
Advertisement
Table of Contents
