Basic Maintenance Knowledge; Types And Timing Of Maintenance - Roland TrueVIS SG3-540 User Manual

Basic Maintenance Knowledge

Types and Timing of Maintenance

To use this machine under its optimal conditions, it is important to perform the appropriate maintenance
at the appropriate times.
Regular Maintenance
These are the maintenance items that are required on a daily basis.
Timing
Before daily operations
After daily operations
If a message appears
When the discharged fluid is ready
to overflow
Advanced Maintenance
Maintenance that is performed in an emergency. Some of this maintenance consumes a large amount of
ink, so thoroughly read the explanation, and then perform the operation at the appropriate point in time.
Timing
If Colors Are Uneven
When dot drop-out or dot displace-
ment occurs
When uneven color, dot drop-out,
and dot displacement issues are not
resolved even by performing the
above operations
*1 This cleaning consumes a large amount of ink.
Replacing consumable parts
These items are for replacement of consumable parts. Thoroughly read the explanation, and then perform
the operation at the appropriate point in time.
224
Introduction
Category
Print head check
Cleaning the machine
Cleaning around the print heads
Disposing of Discharged Fluid
Category
Ink mixing
Checking and cleaning the print
heads
Replacing the ink in all the ink
*1
paths
Item
P. 117Step 1: Performing a Nozzle
Drop-out Test
P. 229Cleaning the Media Path
P. 230Cleaning the Knife Carriage Roll-
er
P. 231Cleaning around the Print Heads
P. 241If the Discharged Fluid Disposal
Message Appears
If the Drain Bottle Exceeds Its Capacity Limit
Item
P. 247Mixing the Ink by Shaking the
Pouch Tray
P. 117Step 1: Performing a Nozzle
Drop-out Test
P. 118Step 2: Normal Cleaning Method
P. 245Medium Cleaning Method
P. 246Powerful Cleaning Method
P. 232Manual Cleaning Method
P. 248Ink Renewal Method