Star Configuration Example - Extron electronics System 8 Plus User Manual

im Vertrieb von
Star Configuration

Star Configuration Example

_____ Important audio information! If audio connections are made balanced, there will
The audio attenuator(s)
on the last input of the
switcher(s) should be set
to 0 dB cut by turning the
attenuator clockwise
until it stops. This setting
will prevent the looped
input from affecting any
gain acquired from
preceding channels.
www.camboard.de
Extron • System 8/10 P
LUS
CAMBOARD Electronics
The illustration below shows how System 8/10 P
a Star configuration. If System 10 P
would be in the input channel numbers.
be +6 dB of gain. This gain must be offset with a pad, otherwise the maximum
input audio level could be exceeded on the audio input. This would result in
distortion. However, if audio connections are made unbalanced, there is no gain.
Tel. 07131 911201
• User's Manual
Fax 07131 911203
Multiple Switcher Operation
units would be connected in
LUS
units were used, the only difference
LUS
ce-info@camboard.de
S
5-6