Standard Features; Universal Projector Control - Extron electronics System 8 Plus User Manual

im Vertrieb von
Features

Standard Features

Universal Projector Control

Universal Inputs
www.camboard.de
Extron • System 8/10 P
LUS
CAMBOARD Electronics
The system switcher can be controlled by the front panel switches, through its
manual remote connector (using E
from a Host through an RS-232 connector. To address large installations with
more than 10 inputs, the switchers can be looped for a total of up to 154 inputs
(17 switchers). Features like Video Loop Back (VLB) make this switcher
adaptable to most application requirements.
• Audio-follow switching
• Audio Breakaway (RS-232 only)
• Balanced audio inputs and outputs
• Audio Mute button
• Bandwidth of 300 MHz
• Eight (System 8) or ten (System 10) inputs (expandable when looped)
• Video inputs terminated at 75 Ω (when not selected)
• Dual microprocessor control
• Projector power button
• Projector video mute
• Switcher RGB mute
• Triple-Action Switching™ (RGB delay)
• Contact closure and Tally remote control
• RS-232 remote control
• Video Loop Back
• UL approved and CE compliant
• Universal inputs
• Universal projector control
The System Switchers are compatible with many major brands of digital control
projectors on the market including:
• Ampro
• Barco
• Digital Projection
• Eiki
• Epson
• Electrohome
• Hughes/JVC
• InFocus
• Mitsubishi
If your projector manufacturer is not included in the above list, please contact
your Extron representattive.
The System 8/10 P
LUS
your choice, but can quickly and easily be reconfigured in the field for any other
compatible brand. Projector control from the switcher includes video muting and
turning projector power on/off. For some projectors, the projector's remote
control device can be used to control the System 8/10 P
All video and audio formats are supported with five BNC and 6-pin Phoenix®
connectors per input channel.
Tel. 07131 911201
• User's Manual
Fax 07131 911203
Introduction to System 8/10 P
or third-party remote control devices), or
XTRON
• NEC/Runco
• Panasonic
• Sanyo
• Seleco
• Sharp
• Sony
• Toshiba
• Zenith
switchers are factory preset for the projector brand of
ce-info@camboard.de
LUS
switcher as well.
LUS
1-2