Extron electronics System 8 Plus User Manual
  1. Manuals
  2. Brands
  3. Extron electronics Manuals
  4. Switch
  5. System 8 Plus
  6. User manual
Extron electronics System 8 Plus User Manual

Extron electronics System 8 Plus User Manual

System switcher
Hide thumbs Also See for System 8 Plus:
Table of Contents

Advertisement

Quick Links

Download this manual
im Vertrieb von
www.camboard.de
CAMBOARD Electronics
System 8/10 Plus
Tel. 07131 911201
Fax 07131 911203
System Switcher
ce-info@camboard.de
68-078-01
Printed in USA

Advertisement

Table of Contents
loading

Related Manuals for Extron electronics System 8 Plus

Summary of Contents for Extron electronics System 8 Plus

  • Page 1 im Vertrieb von CAMBOARD Electronics System 8/10 Plus System Switcher 68-078-01 Printed in USA www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...
  • Page 2 im Vertrieb von CAMBOARD Electronics Safety Guide Safety Instructions • English This symbol is intended to alert the user of important operating and maintenance Warning (servicing) instructions in the literature provided with the equipment. Power Sources • This equipment should be operated only from the power source indicated on the This symbol is intended to alert the user of the presence of uninsulated "dangerous product.
  • Page 3 im Vertrieb von CAMBOARD Electronics System 8/10 Plus Switcher Series Getting Started..Step 1 If the System 8/10 Plus is already configured for your model of projector, go to Step 4 . If it is not set up correctly, it will be necessary to change switch settings on the System 8/10 Plus Main Controller Board.
  • Page 4 im Vertrieb von CAMBOARD Electronics Contents www.camboard.de Tel. 07131 911201 ce-info@camboard.de Extron • System 8/10 P • User’s Manual Fax 07131 911203...

  • Page 5: Table Of Contents

    im Vertrieb von CAMBOARD Electronics Contents CONTENTS Chapter One - Introduction to System 8/10 P Introduction ........................1-1 Equipment Description ..................1-1 Standard Features .................... 1-2 Universal Projector Control ................1-2 Description of Features ..................1-3 Specifications ....................1-4 Packing List ...................... 1-5 Chapter Two - Rear Panel Connections Rear Panel Overview .....................
  • Page 6 im Vertrieb von CAMBOARD Electronics Contents Chapter Four - Controlling the Switcher Controlling the System 8/10 P Switchers ..............4-1 Manual Remote Control ..................4-1 RS-232 Control ....................4-1 Front Panel Buttons and Indicators ................4-2 Button Labels ....................4-3 Front Panel Access Cover ................
  • Page 7 im Vertrieb von CAMBOARD Electronics Contents Legend of Icons ______ Important information – for example, an action or a step that must be done before proceeding. ______ A Warning – possible dangerous voltage present. _______ A Warning – possible damage could occur. _____ A Note, a Hint, or a Tip that may be helpful.
  • Page 8 im Vertrieb von CAMBOARD Electronics Notes www.camboard.de Tel. 07131 911201 ce-info@camboard.de Extron • System 8/10 P • User’s Manual Fax 07131 911203...

  • Page 9: Introduction

    im Vertrieb von CAMBOARD Electronics Introduction to System 8/10 P System 8/10 P Switcher System 8/10 P Switcher User’s Manual User’s Manual Chapter One Chapter One Introduction to System 8/10 P Introduction to System 8/10 P Equipment Description Equipment Description Configurations Configurations Features...
  • Page 10 , however, since the only difference between these two switchers is the number of inputs, they will be referred to as “System 8/10 P ”. KP-10 Keypad RS-232 Control Device Remote Control System 8 PLUS Infrared System Remote Intercommunication Port for Multiple System 8/10 Plus...

  • Page 11: Standard Features

    im Vertrieb von CAMBOARD Electronics Features Introduction to System 8/10 P The system switcher can be controlled by the front panel switches, through its manual remote connector (using E or third-party remote control devices), or XTRON from a Host through an RS-232 connector. To address large installations with more than 10 inputs, the switchers can be looped for a total of up to 154 inputs (17 switchers).

  • Page 12: Description Of Features

    im Vertrieb von CAMBOARD Electronics Features Introduction to System 8/10 P Description of Features Outputs — Because switching is direct, the output will always have the same format as the selected input. Separate output connectors are provided for RGBS, Composite Video, S-Video, and Audio. Video Loop Back (VLB) —...

  • Page 13: Specifications

    im Vertrieb von CAMBOARD Electronics Specifications Introduction to System 8/10 P Specifications General Power ..90 - 260 VAC, 50/60 Hz, SMPS Power consumption ..20 watts Dimensions ..17" W, 10.5" D, 5.1" H Shipping Weight ..18 lbs Operating Temperature ..

  • Page 14: Packing List

    im Vertrieb von CAMBOARD Electronics Introduction to System 8/10 P Packing List Packing List The following items are included with your System 8/10 P switcher: • System 8 (or 10) P switcher • Communications Adapter The Comm adapter allows the System 8/10 to be connected to the projector. This adapter is per customer order.
  • Page 15 im Vertrieb von CAMBOARD Electronics System 8/10 P Switcher User’s Manual Chapter Two Rear Panel Connections input and Output Connections Audio Connections Configuring for RGBS Configuring for Composite Video & S-Video Video Loop Back (VLB) Rack Mounting www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...

  • Page 16: Rear Panel Overview

    im Vertrieb von CAMBOARD Electronics General Rear Panel Connections Rear Panel Overview This chapter covers the types of input and output connections, switches and indicators on the rear panel of the System 8/10 P Rear Panel Controls and Indicators The following list refers to each input channel (left diagram): 1.

  • Page 17: Input Section

    im Vertrieb von CAMBOARD Electronics General Rear Panel Connections Input Section Each input channel of the System 8/10 P has the following: • A set of five BNC connectors mounted vertically. • A six-pin audio connector located below each set of BNC connectors. •...

  • Page 18: Applications

    im Vertrieb von CAMBOARD Electronics Rear Panel Connections Applications Applications The illustration shows examples of some of the equipment that can be connected to a System 8/10 P switcher. www.camboard.de Tel. 07131 911201 ce-info@camboard.de Extron • System 8/10 P • User’s Manual Fax 07131 911203...

  • Page 19: Input Configurations

    im Vertrieb von CAMBOARD Electronics Video Input Rear Panel Connections Input Configurations Each System 8/10 P switcher input can be configured for any of the following RGB connections: • RGB - Red, Green/sync, Blue (3 cables) • RGBS - Red, Green, Blue, and Composite Sync (4 cables) •...

  • Page 20: Video Output Connections

    im Vertrieb von CAMBOARD Electronics Video Output Rear Panel Connections Video Output Connections The System 8/10 P has three sets of BNC output connectors (RGBHV, Composite, and S-Video). Which output connectors are active depends upon which type of input is selected. These connectors provide outputs from the System 8/10 P to the video projector or display monitor.

  • Page 21: Audio Connections

    im Vertrieb von CAMBOARD Electronics Audio Input/Output Rear Panel Connections Audio Connections The System 8/10 P can accept audio from two different sets of input connectors. Left and right audio can use the R and B BNC connectors shown to the left (labeled R Audio and L Audio).

  • Page 22: Rgb (Analog) Input Connections

    im Vertrieb von CAMBOARD Electronics RGB Input Rear Panel Connections RGB (Analog) Input Connections Each switcher input can be configured for any of the following RGB connections: • RGB - Red, Green/sync, Blue (3-cables) • RGBS - Red, Green, Blue, and Composite Sync (4-cables) •...

  • Page 23: Composite Video (Ntsc/Pal) Input Connections

    im Vertrieb von CAMBOARD Electronics NTSC/PAL Input Rear Panel Connections Composite Video (NTSC/PAL) Input Connections NTSC (National Television Standards Committee) and PAL (Phase Alternate Line) composite video signals use a single coax cable. They may or may not have separate audio. See the illustration below to connect a composite video source to the input of a System 8/10 P .

  • Page 24: S-Video Input Connections

    im Vertrieb von CAMBOARD Electronics S-Video Input Rear Panel Connections S-Video Input Connections S-Video or S-VHS is typically an output from the AV source on a 4-pin miniature DIN type connector which must be converted to 2 BNC type connectors – one for chrominance (C) and the other for luminance (Y) - [Extron adapter cable 26-353- 01].

  • Page 25: Video Loop Back (Vlb)

    im Vertrieb von CAMBOARD Electronics Video Loop Back Rear Panel Connections Video Loop Back (VLB) Video Loop Back (VLB) is a special feature which allows a scan doubler (also called “line-doubler”) or an RGB decoder to be used with the System 8/10 P switcher.

  • Page 26: Vlb Operation

    im Vertrieb von CAMBOARD Electronics Video Loop Back Rear Panel Connections VLB Operation The illustration below is an example of a decoder being used in Video Loop Back, however, it could be any one of several types of decoders or line doublers. When VLB is active, the System 8/10 P operates as follows: 1.

  • Page 27: Special Features

    im Vertrieb von CAMBOARD Electronics Special Features Rear Panel Connections Special Features The System 8/10 P has some special features, one of which is Auto Sync Detect. Auto Sync Detect determines what type of RGB sync is being input. Sometimes this feature must be disabled when connecting to certain projectors. For example, if a Barco projector is powered up with no input yet present at the switcher, the projector will not detect any sync and will default to sync on Green.

  • Page 28: Lus In A Rack

    im Vertrieb von CAMBOARD Electronics Rack Mounting Rear Panel Connections Cabling a System 8/10 P in a Rack When routing cables from one unit to another in a rack, do NOT allow the cables to pull down on the equipment. Use “Tie Wraps”, “Rip-Ties” or other devices to secure the cables at some location in the rack that is above the rear panel connectors.

  • Page 29: Projector/Monitor Installation

    im Vertrieb von CAMBOARD Electronics System 8/10 P Switcher System 8/10 P Switcher User’s Manual User’s Manual Chapter Three Chapter One Introduction to System 8/10 P Projector/Monitor Installation Equipment Description Projector Control Configurations Projector/Monitor Applications Features Configuration Specifications www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...
  • Page 30 im Vertrieb von CAMBOARD Electronics General Projector/Monitor Installation Projector/Monitor Installation The System 8/10 Plus can be configured for many projectors. Among the projector manufacturers which Extron supports are: • Ampro • NEC/Runco • Barco • Panasonic • Digital Projection • Sanyo •...

  • Page 31: Projector Control Port

    im Vertrieb von CAMBOARD Electronics Cables Projector/Monitor Installation Projector Control Port The projector control port is a 15-pin HD connector located at the upper right hand corner of the rear panel. A Communications Cable (CC) is used to connect the System 8/10 P to the projector, or to a suitable communications adapter.

  • Page 32: Stand Alone Operation

    im Vertrieb von CAMBOARD Electronics Projector/Monitor Installation Comm Adapters 200 Ft (max) 15-PIN 15-PIN 15-PIN 15-PIN D-SUB FEMALE MALE D-SUB FEMALE D-SUB MALE Ampro Extron HOST Communications connector Adapter Type II Stand Alone Operation If you plan to use your System 8/10 P in a system where it will not be connected to a projector, it must be configured for RS-232 mode.

  • Page 33: Extron Comm Adapters

    im Vertrieb von CAMBOARD Electronics Configuration Projector/Monitor Installation Extron Comm Adapters Extron communications adapters (Comm Adapters) provide the interface between the 9-pin connector of the communications cable and the display’s switcher port. Extron manufactures a wide range of Comm Adapters to interface with virtually all projector makes and models.
  • Page 34 im Vertrieb von CAMBOARD Electronics Projector/Monitor Installation Notes _____ www.camboard.de Tel. 07131 911201 ce-info@camboard.de Extron • System 8/10 P • User’s Manual Fax 07131 911203...
  • Page 35 im Vertrieb von CAMBOARD Electronics System 8/10 P Switcher User’s Manual Chapter Four Rear Panel Connections Remote Controls Front Panel Button Labels www.camboard.de Tel. 07131 911201 ce-info@camboard.de Fax 07131 911203...

  • Page 36: Controlling The System 8/10 Plus Switchers

    im Vertrieb von CAMBOARD Electronics Controlling the Switcher General Controlling the System 8/10 P Switchers The System 8/10 P Switchers can be controlled four ways: 1. Manual front panel controls (See next page.) 2. Manual, (contact closure) wired remote control 3.

  • Page 37: Front Panel Buttons And Indicators

    im Vertrieb von CAMBOARD Electronics Front Panel Controlling the Switcher Front Panel Buttons and Indicators The following Front Panel Controls are used to operate the System 8/10 P Power indicator – Lights to indicate System 8/10 P switcher input power is On. This LED also blinks when the optional IR-30 remote receiver is detecting a signal from the transmitter.

  • Page 38: Button Labels

    im Vertrieb von CAMBOARD Electronics Controlling the Switcher Miscellaneous The right side of the front panel has a removable cover for accessing setup controls. This is explained in Chapter 3. Button Labels 1. Remove the desired key cap from the switcher by grasping the top and bottom of the key cap and pulling it away from the switcher.
  • Page 39 im Vertrieb von CAMBOARD Electronics Multiple Switcher Operation System 8/10 P Switcher User’s Manual Chapter Five Multiple Switcher Operation Two Switcher Operation Daisy Chain Connection Star Connection Looping with System 4 xi www.camboard.de Tel. 07131 911201 ce-info@camboard.de Extron • System 8/10 P •...

  • Page 40: Multiple Switcher Installation

    im Vertrieb von CAMBOARD Electronics Multiple Switcher Operation Looping Multiple Switcher Installation This chapter shows how to connect multiple switchers in the following ways: • Two Switcher Operation • Daisy Chain Connections • Star Connections • Using System 8/10 P as slave(s) to System 4 For large installations that require more inputs than one system switcher can handle, multiple switchers can be looped together.

  • Page 41: Dip Switch Types

    im Vertrieb von CAMBOARD Electronics Looping Multiple Switcher Operation DIP Switch Types Before going into the switch setups, let us first explain that there are different types of DIP switches, some "slide" and some "rock". Your System 8/10 P could have either type DIP switch. Although they operate differently and are labeled differently, they are simply on/off (open/closed) switches.

  • Page 42: Daisy Chain Connection

    im Vertrieb von CAMBOARD Electronics Multiple Switcher Operation Daisy Chain Configuration Daisy Chain Connection Daisy Chain configuration refers to routing the output of the first slave (#0) into the last input of the master switcher, and the output of the second slave (#1) into the last input of slave #0...

  • Page 43: Daisy Chain Example

    im Vertrieb von CAMBOARD Electronics Daisy Chain Configuration Multiple Switcher Operation Daisy Chain Example The illustration below shows how System 8/10 P units would be connected in a Daisy Chain configuration. If System 10 P units were used, the only difference would be the input channel numbers.

  • Page 44: Star Connection

    im Vertrieb von CAMBOARD Electronics Multiple Switcher Operation Star Configuration Star Connection In a Star configuration, the output of each slave supplies an input to the master switcher. There is no slave #0 in a Star configuration. For example, slave #1 is connected to input #1 of the master switcher;...

  • Page 45: Star Configuration Example

    im Vertrieb von CAMBOARD Electronics Star Configuration Multiple Switcher Operation Star Configuration Example The illustration below shows how System 8/10 P units would be connected in a Star configuration. If System 10 P units were used, the only difference would be in the input channel numbers. _____ Important audio information! If audio connections are made balanced, there will be +6 dB of gain.

  • Page 46: Lus Lus

    im Vertrieb von CAMBOARD Electronics Looping with System 4 xi Multiple Switcher Operation System 4 with One System 8/10 P Switcher The System 8/10 P must be configured as a System 4 Slave. Connect the RGBHV and Audio output of the System 8/10 switcher to the last (4th) input of the System 4.
  • Page 47 im Vertrieb von CAMBOARD Electronics Looping with System 4 xi Multiple Switcher Operation System 4 with Multiple System 8/10 P Switchers This configuration will work only with System 8/10 P switchers in a Daisy Chain configuration. The master of the System 8/10 P chain must be configured in the “RS-232 only”...
  • Page 48 im Vertrieb von CAMBOARD Electronics Looping with System 4 xi Multiple Switcher Operation System 8/10 P Switch Settings From the front access panel on the System 8/10 P , do the following: 1. On DIP switch block SW15, set switches #6 and #8 “up”. 2.

  • Page 49: Switcher

    im Vertrieb von CAMBOARD Electronics RS-232 Programming Guide System 8/10 P Switcher User’s Manual Appendix A RS-232 Programming Guide RS-232 Protocol Commands and Responses www.camboard.de Tel. 07131 911201 ce-info@camboard.de Extron • System 8/10 P • User’s Manual Fax 07131 911203...

  • Page 50: Appendix A - Rs-232 Programming Guide

    im Vertrieb von CAMBOARD Electronics RS-232 Programming Guide Protocol Programming the System 8/10 P This section covers the commands for a host to set up and control the System 8/ 10 P by way of the RS-232 port. RS-232 Connections A standard RS-232 port is available on the back of the System 8/10 P for use by a host.

  • Page 51: Related Terms

    im Vertrieb von CAMBOARD Electronics Terms RS-232 Programming Guide Related Terms The following terms may be helpful in understanding information in the tables and examples that follow. Delimiter: A delimiter character may specify audio and not video, the switcher and not the projector, etc.

  • Page 52: Command/Response Table

    im Vertrieb von CAMBOARD Electronics RS-232 Programming Guide Command and Response Command/Response Table The Command/Response table lists commands, responses and data characters recognized by the System 8/10 P . The Command string (string = one or more characters) in the left hand column of the table is defined in the right hand column (both in Bold print).
  • Page 53 im Vertrieb von CAMBOARD Electronics Command and Response RS-232 Programming Guide Command/Response Table Command Response String Command String Switcher to Host Description; etc. ↵Cx↵ (x is the channel #, 1 - 154) * 21 Select Channel (See page A-2) ↵Ax↵ (x is the audio channel #, 1 - 154) * 24 Character following Command channel ↵Vx↵...
  • Page 54 im Vertrieb von CAMBOARD Electronics RS-232 Programming Guide Command and Response List Below is a list of Commands/Responses listed in numeric order, together with a general description. The "Cmd/Rsp" column indicates how the character is used: Cmd - indicates a host command (or part of a command) to the switcher. Rsp - indicates a switcher response to the host.

  • Page 55: Appendix B - Reference

    im Vertrieb von CAMBOARD Electronics Reference System 8/10 P Switcher System 8/10 P Switcher User’s Manual User’s Manual Appendix B Chapter One Introduction to System 8/10 P Reference Equipment Description Manual Remote (Tally) Configurations Features Related Part Numbers Specifications Removing the Cover Upgrading &...

  • Page 56: Manual Remote Operation

    im Vertrieb von CAMBOARD Electronics Reference Manual Remote Control Manual Remote Operation The Manual Remote connector is a 25-pin D-Sub port used to remotely control the System 8/10 P switcher by dry contact closures to ground by using an Extron hard-wired remote (optional KP-10) or another manufacturer's remote control device.

  • Page 57: Related Parts List

    im Vertrieb von CAMBOARD Electronics Parts Reference Related Parts List The System 8/10 P needs two additional parts to control a display device: 1. A Projector Communications Extension Cable (CC Cable) 2. A Communications Adapter (Comm Adapter) The Communications Extension Cable is the same for most applications (other than the choice of length).

  • Page 58: Removing The System 8/10 Plus Cover

    im Vertrieb von CAMBOARD Electronics Reference Removing the Cover Removing the System 8/10 P Cover There is rarely a need for the user to remove the System 8/10 P cover. Three possible reasons would be: • To change the Main Controller Board SW1 switch settings (switches 3 & 4 only) •...

  • Page 59: Changing The Host Baud Rate

    im Vertrieb von CAMBOARD Electronics Host Baud Rate Reference Switch 4: When set “ON” - if the front panel’s Display Power button is momentarily depressed, the connected projector will immediately power up/down without the default 2-second delay. When set “OFF” - the front panel’s Display Power button must be depressed for 2 seconds before the connected projector will power up/down.

  • Page 60: Installing The Infrared Remote Ic Chip

    im Vertrieb von CAMBOARD Electronics Reference Infrared Remote Installation Installing the Infrared Remote IC Chip Before starting this procedure, verify that power has been removed from the System 8/10 P by removing the AC power cord. _______ Use ESD protection by grounding yourself with an approved wrist strap. An electrostatic discharge that is too small to be felt or seen is still capable of destroying or causing intermittent damage to IC circuits.

  • Page 61: Infrared Remote Control Operation

    im Vertrieb von CAMBOARD Electronics Infrared Remote Operation Reference Infrared Remote Control Operation _____ The IR-10 Remote control will also allow use of the Manual Remote 25-pin D-Sub port, whereas the IR-30 Remote will not. Verify that batteries are installed in the IR-30 Remote Transmitter.

  • Page 62: Changing The Projector Control Software Chip

    im Vertrieb von CAMBOARD Electronics Reference Projector Control Upgrade Changing the Projector Control Software Chip Use this procedure when it is necessary to upgrade the Projector Control software. Before starting, verify that power has been removed from the System 8/10 P by removing the AC power cord.

  • Page 63: Changing The Switcher Control Software Chip

    im Vertrieb von CAMBOARD Electronics Main Controller Upgrade Reference Changing the Switcher Control Software Chip Use this procedure when it is necessary to upgrade the Main Controller software. Before starting, verify that power has been removed from the System 8/10 P by removing the AC power cord.

  • Page 64: Enlever Le Couvercle Du Système 8/10 P (French

    im Vertrieb von CAMBOARD Electronics Reference Enlever le couvercle Enlever le couvercle du Système 8/10 P Si la configuration du Système 8/10 P doit être modifiée pour un différent projecteur, il est nécessaire d’accéder à la carte du Contrôleur Principal. De même, si le fusible de l’alimentation secteur doit être changé, on devra ouvrir l’appareil.

  • Page 65: Câbler Un Système 8/10 Plus Sur Un Rack (French

    im Vertrieb von CAMBOARD Electronics Câbler sur un rack Reference Câbler un Système 8/10 P sur un rack Quand vous fixez les câbles d’une unité à l’autre, veillez à ce que ces câbles ne soient pas “supportés” par le Système 8/10 P .
  • Page 66 im Vertrieb von CAMBOARD Electronics Reference Entfernung der Abdeckung Entfernung der System 8/10 P Abdeckung Die Abdeckung des System 8/10 P muß entfernt werden wenn für eine andere VDU eingerichtet, und dadurch Zugang zum Hauptcontroller benötigt wird, oder wenn die Hauptsicherung ausgetauscht wird. 1.
  • Page 67 im Vertrieb von CAMBOARD Electronics Verkabelung Innerhalb Eines Gestells Reference Verkabelung vom System 8/10 P innerhalb eines Gestells Wenn Sie Kabel innerhalb eines Gestells von einem Gerät zum anderen verlegen, sollen diese Kabel nicht vom System 8/10 P gehalten werden. Verwenden Sie Kabelbinder oder ähnliches um die Kabel an einem Punkt zu befestigen der höher liegt als die Anschlüße an der Rückseite des Gerätes.
  • Page 68 im Vertrieb von CAMBOARD Electronics Reference _____ www.camboard.de Tel. 07131 911201 ce-info@camboard.de B-13 Extron • System 8/10 P • User’s Manual Fax 07131 911203...

  • Page 69: Glossary Of Terms

    im Vertrieb von CAMBOARD Electronics Glossary of Terms Reference Glossary of Terms AC – Alternating Current – Flow of electrons that changes direction alternately. ADA – Analog Distribution Amplifier – A device that takes in one signal and distributes it to several outputs without “tying”...
  • Page 70 im Vertrieb von CAMBOARD Electronics Reference Glossary of Terms Brightness – Usually refers to the amount, or intensity of video light produced on a screen. Sometimes called “black level”. Buffer – Generally referred to as a unity gain amplifier used to isolate the signal source from the load.
  • Page 71 im Vertrieb von CAMBOARD Electronics Glossary of Terms Reference DC – Direct Current – The flow of electrons in one direction. A connector with rounded corners and angled ends, taking on the shape of the letter “D”. Commonly used in computers and video. Decibel –...
  • Page 72 im Vertrieb von CAMBOARD Electronics Reference Glossary of Terms Horizontal Resolution – Smallest increment of a video picture in the horizontal plane is a scan line. The number of scan lines is dependent upon the video bandwidth and is measured in frequency.
  • Page 73 im Vertrieb von CAMBOARD Electronics Glossary of Terms Reference Power (Electrical) – The dissipation of heat by passing a current through a resistance. Measured in Watts (W), it is expressed by Ohm’s law from the two variables: Voltage (E) and Current (I).
  • Page 74 im Vertrieb von CAMBOARD Electronics Reference Glossary of Terms Strike – In the Audio/Video business, this is the tearing down of an installation or show. Sync – In video, a means of synchronizing signals with timing pulses to insure that each step in a process occurs at exactly the right time.
  • Page 75 im Vertrieb von CAMBOARD Electronics Glossary of Terms Reference _______ www.camboard.de Tel. 07131 911201 ce-info@camboard.de Extron • System 8/10 P • User’s Manual B-20 Fax 07131 911203...
  • Page 76 im Vertrieb von CAMBOARD Electronics Reference _____ www.camboard.de Tel. 07131 911201 ce-info@camboard.de B-21 Extron • System 8/10 P • User’s Manual Fax 07131 911203...
  • Page 77 Vertrieb von CAMBOARD Electronics Extron's Warranty Extron Electronics warrants the product against defects in materials for a period of two years and defect in workmanship for a period of two years from the date of purchase. In the event of malfunction...
  • Page 78 Vertrieb von CAMBOARD Electronics EXTRON ELECTRONICS / RGB SYSTEMS, INC. EXTRON ELECTRONICS, EUROPE EXTRON ELECTRONICS, ASIA 1230 South Lewis Street, Anaheim, CA 92805 Beeldschermweg 6C, 3821 AH Amersfoort 41B Kreta Ayer Road, Singapore 089003 +65-226-0015 FAX +65-226-0019 (800) 633-9876 (714) 491-1500 FAX (714) 491-1517...

This manual is also suitable for:

System 10 plus

Table of Contents