Extron electronics System 8 Plus User Manual page 30

im Vertrieb von
Projector/Monitor Installation
Projector/Monitor Installation
_____ If your projector manufacturer is not listed here, please consult with Extron.
www.camboard.de
3-1
CAMBOARD Electronics
The System 8/10 Plus can be configured for many projectors. Among the
projector manufacturers which Extron supports are:
• Ampro
• Barco
• Digital Projection
• Eiki
• Electrohome
• Epson
• Hughes/JVC
• InFocus
• Mitsubishi
Extron System 8/10 P switchers have bidirectional (i.e., "talk-listen"), user-
LUS
programmable communications that communicates with the displays listed
above. If projector input selection is made by the hard-wired or infrared remote
control of the display*, the System 8/10 P
and switches to the proper input.
When an input selection is made at the switcher (by a front panel button, hard-
wired remote control, RS-232 communications or IR-30), the System 8/10 P
switches the projector to RGBS, S-Video, or Composite (as required) and
commands the projector to load the pre-programmed presets for that input.
* not applicable on some displays
Tel. 07131 911201
Fax 07131 911203
• NEC/Runco
• Panasonic
• Sanyo
• Seleco
• Sharp
• Sony
• Toshiba
• Zenith
switcher "listens" to the selection
LUS
ce-info@camboard.de
Extron • System 8/10 P
LUS
General
LUS
• User's Manual