Button Labels; Front Panel Access Cover - Extron electronics System 8 Plus User Manual

im Vertrieb von
Controlling the Switcher

Button Labels

Front Panel Access Cover

www.camboard.de
4-3
CAMBOARD Electronics
The right side of the front panel has a removable cover for accessing setup
controls. This is explained in Chapter 3.
1. Remove the desired key cap from
the switcher by grasping the top and
bottom of the key cap and pulling it
away from the switcher.
2. Dismantle the button by prying the
clear legend cover from the key cap
base.
3. Label the button by using rub-on
letters on the white legend plate or by placing a small clear or white label
between the white legend plate and the clear legend cover.
4. Reinsert the key cap back into place on the switcher.
The Front Panel has a cover that can easily be removed for configuring the
System 8/10 P for different applications. Use a small screwdriver to release
LUS
the captive screws that hold the access cover on. Note that the cover has a label
on the inside that shows how to configure the switches. Chapter 3 has detailed
instructions for using this area.
Tel. 07131 911201
Fax 07131 911203
LEGEND
PLATE
CLEAR LEGEND
COVER
U3
U1
ce-info@camboard.de
Extron • System 8/10 P
LUS
Miscellaneous
KEY CAP
J2
J3
• User's Manual