Safety Instructions - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer
It is prohibited to load explosive or similar
materials or inflammable materials
(according to §1 SprengG).
Materials that are subject to special
conditions of disposal according to the waste
disposal law must not be loaded.
Furthermore it is prohibited to fill with
rumble, timber or other such materials out of
metal or other hard materials. Only such
material may be compacted which can be
deformed by the given pressure and which
can be compressed in the compression room.
Glowing or burning particles must not be
loaded.
Another use or a surpassing use does not
comply with the intended purpose. PRESTO
GmbH & Co.KG will not be liable for damages
resulting from this. The risk will be borne by
the user of the machine.
The electric machines
and/or equipment are
production equipment for
use in industrial high
voltage systems. During
operation this production
equipment has dangerous
live parts which may
cause very serious injury
to health or damage to
property for instance as a
result of unauthorised
removal of coverings,
improper use, incorrect
operation or lack of
DANGER!
maintenance.
04/2012 3 - 2
The staff responsible for the safety of the
unit has to safeguard that only qualified
persons
are instructed with work on the machine-
that these persons always have the supplied
operating instructions available and that they
are obliged to strictly adhere to these
documents. Working at the unit or in the
proximity has to be prohibited for non-
qualified personnel.
During filling the compactor with
material that may cause skin
damage wear gloves!
Pay attention to flying solids!
Use eye protection!
At places where there are solid airborne
particles or where dusts, caustic substances
or the like are processed or produced.
Residual risks with regard to the channel-
type baling press:
• Endangering by failure to comply with

safety instructions

• Danger by insufficient maintenance and
repair
• Risks through hydraulic hoses
• Risks through sharp-edged casing corners
• Risks arising during maintenance,
servicing, and repair work through the
use of sharp-edged or inappropriately
compacted materials (see note in chap. 7,
Maintenance and Inspection).
The user will be responsible for these
residual risks.