Maintenance - Presto Conti Compact Series Operating And Maintenance Instructions Manual

Channel-type baling press
Table of Contents

Advertisement

PRESTO
GmbH & Co. KG
Bad Laer

7. Maintenance

As a rule it is recommended to conclude a
maintenance agreement with PRESTO. The
maintenance will be carried out twice a year
by our service department. Because of the
special knowledge of our service mechanics
sources of trouble are found in time and can
be corrected.
Safety equipment for the
prevention or elimination of
hazards must be maintained
according to § 39(3), BGV A1
- General regulations and
must be checked with
respect to their proper
function at least once per
month by a qualified person.
someone who on the basis
of his special training has
sufficient knowledge in the
field of the used machine.
Furthermore the qualified
person must be familiar with
the relevant on-the-job-
safety provisions, accident
prevention rules, guidelines
and generally accepted
technical rules to such an
extent that he/she can judge
the safe condition of the
For channel-type baling presses which are
operated outside of the application area, the
existing regulations and guidelines of the
user country will be valid.
Attention!
at regular intervals
A qualified person is
used machine.
7.1.
Safety covers held in place by bolts which fit
through keyhole-shaped slots are removed
from the machine by loosening the bolts 3 or
4 turns. The bolts should remain in the drill
holes. The cover can now be slid along the
keyhole and removed by lifting over the bolt
heads which fit through the round, upper
keyhole aperture. The covers are replaced by
reversing the sequence.
In case of maintenance and repair works the
machine has to be cut off completely and be
secured against unauthorised reclosing.
Danger!
Staying in the danger zone is only permitted
during specially described works for
correspondingly instructed personnel
and/or qualified experts whereby the safety
instructions have to be adhered to.
ATTENTION!
All works, such as commissioning,
maintenance and repairs may be carried out
by qualified personnel only and/or have to
be controlled by responsible experts.
04/2012
7 - 1
General
For a better presentation
we have left away the
protective covers in some
illustrations. The channel-
type baling press may be
taken into operation with
properly fixed or closed
protective covers only.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents