Protective Devices - Presto Conti Compact Series Operating And Maintenance Instructions Manual

PRESTO
GmbH & Co. KG
Bad Laer
3.4.

Protective devices

It is prohibited to put control, switching or
safety devices out of operation or to make
modifications. Non-compliance may result in
criminal prosecution.
Safety covers held in place by bolts which fit
through keyhole-shaped slots are removed
from the machine by loosening the bolts 3 or
4 turns. The bolts should remain in the drill
holes. The cover can now be slid along the
keyhole and removed by lifting over the bolt
heads which fit through the round, upper
keyhole aperture. The covers are replaced by
reversing the sequence.
Seals may not be destroyed and pre-set
pressures may not be changed because this
would result in an expiration of the warranty
and criminal prosecution.
Equipment for the protection of the staff:
Emergency-off switch, switch box
Safety switch, charging funnel
Safety switch with rope release (1)
Emergency-off, key bar
04/2012 3 - 4